KZ VS Meze Audio

ZSN Pro —vs— Alba

Published by GK / GK HiFi, owner and operator of GK AudioLab.

Why compare models from different historical price bands?

ZSN Pro and Alba are not presented here as equivalent-price substitutes. The directory places ZSN Pro in $0–$50 and Alba in $100–$200, and those are historical categories rather than current quotations. This comparison answers a different question: what does a much higher category price actually establish from the specifications available? It reveals an architecture change and a better-defined sensitivity reference, but it does not establish a sound-quality improvement proportional to the price difference.

KZ

ZSN Pro

Hybrid
Driver architecture 10mm Dynamic + 30095 BA
Impedance 24Ω
Sensitivity 112dB
Tuning reference —
Meze Audio

Alba

Dynamic
Driver architecture 10.8mm Dynamic
Impedance 32Ω
Sensitivity 109dB SPL/mW @1kHz
Tuning reference —

Side-by-Side Specifications

Pair ZSN Pro Alba
Config 10mm Dynamic + 30095 BA 10.8mm Dynamic
Driver architecture Hybrid Dynamic
Impedance 24Ω 32Ω
Sensitivity 112dB 109dB SPL/mW @1kHz
Tuning reference — —
Price range $0-$50 $100-$200

Source-led decision analysis

KZ ZSN Pro lists 24Ω; Meze Audio Alba lists 32Ω. Their nominal values differ by 8Ω, which is not a matched loudness result or a complete impedance-curve comparison. A usable sensitivity reference is not established for KZ ZSN Pro; do not borrow a reference from the other entry. The historical directory bands are $0-$50 and $100-$200. They identify catalog groups, not live offers; compare exact editions, accessories, destination and return terms separately.

Model-specific checks: KZ ZSN Pro

ZSN Pro specifies a 10mm dynamic driver plus a 30095 balanced armature, with 24Ω and a 112dB sensitivity field lacking an input reference. The two-driver description is a usable architecture distinction. It does not specify the crossover frequency, the acoustic contribution of each unit, phase integration or matched distortion. Do not interpret an added armature as a guaranteed improvement in detail or treble.

The current KZ page lists a 0.75mm pin specification. That matters when another model lists 0.78mm or a manufacturer-specific two-pin description: being detachable does not establish plug interchangeability. Confirm the socket form, cable and microphone edition with the actual listing, and avoid forcing a replacement connector simply because both products use two pins.

Model-specific checks: Meze Audio Alba

Alba has an explicitly referenced sensitivity: 109dB SPL/mW at 1kHz, with a nominal 32Ω load and one 10.8mm dynamic driver. This is a better-defined electrical field than a bare dB number, not proof of a better sounding earphone. Its larger listed diameter is one physical dimension; it cannot establish bass response, distortion or fit without the missing acoustic and mechanical conditions.

The current manufacturer page distinguishes ALBA from ALBA S: the USB-C adapter is not included with ALBA S. That makes the edition relevant when comparing the complete phone-ready package. Confirm the selected edition and accessory list rather than using a starting price or an image of a bundle. The historical $100–$200 directory band is not a guarantee of current contents, service, local warranty or delivery.

What would settle the remaining choice

For KZ ZSN Pro versus Meze Audio Alba, request the missing sensitivity basis and version conditions for KZ ZSN Pro. If a connector, microphone, nozzle or fit requirement is decisive, verify it directly using the model-specific checks. If the evidence does not settle your real problem, keep the choice open; replacing a working product is not a required outcome of this comparison.

Check the sensitivity reference

IEMPublished sensitivityNominal example at 1 Vrms
KZ ZSN Pro112dBReference not established
Meze Audio Alba109dB SPL/mW @1kHz123.95 dB/V

The normalized value is a calculation using nominal impedance, not a measurement. Test frequency, tolerance, version and equipment are not matched; do not rank loudness or sound with this column.

A hybrid arrangement versus one specified dynamic driver

ZSN Pro combines a 10mm dynamic driver and a 30095 balanced armature. Alba lists one 10.8mm dynamic driver. A larger nominal diaphragm diameter describes one physical dimension; without diaphragm geometry, moving mass, acoustic loading and a matched response measurement, it cannot tell you which design produces stronger bass or lower distortion. Likewise, the BA in ZSN Pro does not prove superior treble. Those claims would need evidence of the actual output, not just the inventory of parts.

One sensitivity reference is usable and the other is incomplete

Alba records 109dB SPL/mW at 1kHz with 32Ω. ZSN Pro records 112dB and 24Ω, but its dB figure has no per-power or per-voltage reference in this record. Subtracting 109 from 112 would compare unmatched quantities. We can say Alba supplies a more explicit input reference; we cannot say the KZ is three decibels louder. The stated impedance difference also does not identify the noise floor or available level from your particular phone, laptop or USB dongle.

What could justify paying more needs its own check

A buyer may value shell construction, cable hardware, included accessories, local support or a particular retailer return path. Those can be legitimate requirements, but the two electrical figures do not document them. Ask for the exact contents and current warranty terms in your market; look for clear photographs of the supplied connector and accessories. Do not assume that the higher historical band proves better service, a better fit, a higher-quality DAC or a matched acoustic result. None of those assumptions is demonstrated by this table.

When each model belongs on your shortlist

ZSN Pro belongs in a shortlist built around its documented hybrid topology and the actual delivered cost of the required bundle. Alba belongs in a shortlist if its single-dynamic design or separately confirmed physical package addresses a concrete requirement you have. If your main question is whether your existing earphones need replacing for sound alone, neither price band is sufficient. Use the same ear tips and source where a comparison is possible, and keep the distinction between a personal preference and a controlled observation visible.

Five checks that avoid a false upgrade decision

Confirm the exact ZSN Pro name rather than a similarly named later version. Confirm which Alba accessories are included in the listing available to you. Record delivered prices on the same date and in one currency. Ask for the sensitivity basis for ZSN Pro if you need an electrical comparison. Finally, read an independently attributed response measurement or listening review of those exact configurations before treating the more expensive category as an audible upgrade. The outcome may be that the extra cost solves no requirement you have; this page does not require a purchase to be useful.

A USB-C shopping comparison must identify the ALBA edition

The current Meze page distinguishes ALBA from ALBA S and says the USB-C adapter is not included with ALBA S. That changes this comparison for a phone with no analog socket. Do not compare a ZSN Pro earphone-only offer against an ALBA bundle with an adapter and call the difference an earphone price premium. Write down the exact Meze edition, whether an adapter is supplied, and the separate adapter needed by the chosen ZSN Pro cable. Verify the seller bundle rather than transferring an accessory from one edition to another.

The sensitivity numbers do not justify a louder-model purchase

Alba publishes109dB SPL/mW at1kHz with32Ω. ZSN Pro lists112dB with24Ω but no input reference. Subtracting109 from112 does not produce a supported advantage for ZSN Pro. Conversely, converting the Alba record to a nominal voltage reference still leaves the ZSN Pro basis unknown. If a phone or dongle is already too quiet, test the exact cable and source or request the missing basis. Neither the published diameter of Alba’s10.8mm dynamic driver nor ZSN Pro’s additional BA solves that missing electrical comparison.

Choose a complete usable setup, or postpone the switch

For a user specifically seeking a published single-dynamic design, Alba is the matching architecture here; for a user seeking a DD-plus-BA design, ZSN Pro is the matching record. For a call microphone, reused cable or comfortable fit, the selected physical bundle needs direct confirmation. ZSN Pro’s published0.75mm connector is not evidence that an Alba accessory will fit, and the two historical price bands do not quote today’s delivered totals. If the present ZSN Pro already works, an upgrade requires evidence of the actual problem being solved. If starting from neither, compare the complete required setup and return terms before selecting a topology.

Sources and specification limits

GK AudioLab publishes GK product information. Comparisons involving GK models are brand-authored; source specifications are not independent listening tests.

KZ ZSN Pro

Manufacturer: KZ · Source checked:

The inspected source lists sensitivity in dB without identifying a per-mW or per-volt reference. The displayed value is retained as a quotation, not a normalized comparison.

Meze Audio Alba

Manufacturer: Meze Audio · Source checked:

Sensitivity is stated per milliwatt. Preserve any stated test frequency and tolerance; it is not directly comparable with a per-volt figure.

— means the inspected source does not establish a reliable value.

Price bands are historical directory categories, not current offers. Confirm the exact model, nozzle, cable, local price and return terms with the seller.

Editorial method