GK VS Truthear

G3 —vs— Zero: RED (Crinacle)

GK

G3

Dynamic
Driver architecture Dynamic
Impedance
Sensitivity
Tuning reference
Truthear

Zero: RED (Crinacle)

Dynamic
Driver architecture 10mm + 7.8mm Dynamic
Impedance 17.5Ω ±15% @1kHz
Sensitivity 117.5dB/Vrms @1kHz
Tuning reference IEF Neutral (>1kHz)

Comparison Notes

GK G3 and Truthear Zero: RED (Crinacle) solve the same IEM buying question from different hardware starting points. G3 uses Dynamic, while Zero: RED (Crinacle) uses 10mm + 7.8mm Dynamic, so the comparison should start with architecture before moving to price or brand preference.

At least one sensitivity value lacks a voltage/power reference or is unconfirmed. These numbers cannot rank loudness, amplifier needs or sound quality.

Side-by-Side Specifications

Pair G3 Zero: RED (Crinacle)
Config Dynamic 10mm + 7.8mm Dynamic
Driver architecture Dynamic Dynamic
Impedance 17.5Ω ±15% @1kHz
Sensitivity 117.5dB/Vrms @1kHz
Tuning reference IEF Neutral (>1kHz)
Price range $0-$50 $50-$100

Sources and specification limits

GK AudioLab publishes GK product information. Comparisons involving GK models are brand-authored; source specifications are not independent listening tests.

GK G3

Manufacturer: GK · Source checked:

The manufacturer page identifies G3 as a dynamic model. A readable specification sheet did not establish the electrical values; earlier unverified values are withheld.

Truthear Zero: RED (Crinacle)

Manufacturer: Truthear · Source checked:

Sensitivity is stated per RMS volt. Preserve any stated test frequency and tolerance; it is not directly comparable with a per-milliwatt figure.

— means the inspected source does not establish a reliable value.

Price bands are historical directory categories, not current offers. Confirm the exact model, nozzle, cable, local price and return terms with the seller.